Structural frames, formwork and concrete work

• Pages: 61-66

61

11. Structural frames, formwork and concrete work

11.1. General provisions

11.1.1. The erection or dismantling of buildings, structures, civil engineering

works, formwork, falsework and shoring should be carried out by trained workers only

under the supervision of a competent person.

11.1.2. Adequate precautions should be taken to guard against danger to workers

arising from any temporary state of weakness or instability of a structure.

11.1.3. Formwork, falsework and shoring should be so designed, constructed and

maintained that it will safely support all loads that may be imposed on it.

11.1.4. Formwork should be so designed and erected that working platforms,

means of access, bracing and means of handling and stabilising are easily fixed to the

formwork structure.

11.2. Erection and dismantling of steel and prefabricated structures

11.2.1. As far as practicable the safety of workers employed on the erection and

dismantling of steel and prefabricated structures should be ensured by appropriate

means, such as provision and use of:

(a) ladders, gangways or fixed platforms;

(b) platforms, buckets, boatswain's chairs or other appropriate means suspended from

lifting appliances;

(c) safety harnesses and lifelines, catch nets or catch platforms;

(d) power-operated mobile working platforms.

11.2.2. Steel and prefabricated structures should be so designed and made that

they can be safely transported and erected, and if required by national laws and

regulations each unit should be clearly marked with its own weight.

11.2.3. In addition to the need for the stability of the part when erected, when

necessary to prevent danger the design should explicitly take into account:

(a) the conditions and methods of attachment in the operations of transport, storing and

temporary support during erection or dismantling as applicable;

(b) methods for the provision of safeguards such as railings and working platforms,

and, when necessary, for mounting them easily on the structural steel or

prefabricated parts.